LPS25HB Pressure/Altitude Sensor Carrier with Voltage Regulator Category_Arduino/Shields for Arduino dust) compared with other similar

dust) compared with other similar sensors

To use the CR Servo Trigger

* 9x 10K Ω Resistor - 1/4W

* Tipping Bucket Rain Gauge

LPS25HB Pressure/Altitude Sensor Carrier with Voltage Regulator Category_Arduino/Shields for Arduino dust) compared with other similarThis carrier for ST's LPS25HB digital barometer measures pressures from 260 mbar to 1260 mbar (26 kPa to 126 kPa) with absolute accuracy down to 1 mbar (0. 1 kPa), or 0. 2 mbar (0. 02 kPa) with calibration, and typical RMS noise of 0. 01 mbar (1 Pa) in high resolution mode. These pressures can easily be converted to altitudes. The board has a 3. 3 V linear regulator and integrated level shifters that allow it to work over an input voltage range of 2.